Power Supply AC 100 ~ 240V 50Hz / 60Hz 
 Power consumption (approx.) 300W 
 And cooling fan stopped working standby mode: 0.4W * 1 (standby mode: energy saving), 15W * 2 (standby mode: Normal) 
 Current is 3.5A ~ 1.2A 
 LCD panels 
 LCD board size of 0.63 inches (16mm) 
 Aspect ratio of 4:3 
 Show the way 3-style through the LCD panels (RGB) 
 Drive mode active matrix 
 Pixels 786,432 pixels (1024 × 768) × 3 block 
 Lens fixed focus / manual focus, the F 1.80 f 6.74mm 
 Light Source 220W UHM spotlight (bulb replacement cycle is 5000 hours * 3) 
 Brightness * 2800lm 
 Uniformity of illumination * 85% 
 Contrast * 2000:1 (full white / full black) 
 Scanning frequency Horizontal scan frequency: 15kHz to 91kHz 
 Vertical scanning frequency: 50Hz ~ 85Hz 
 Dot clock frequency: less than 170 MHz 
 Component signal 525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720) / 60p, 
 750 (720) / 50p, 1 125 (1 080) / 60i, 1 125 (1 080) / 50i, 
 1 080 / 60p / 50p, 1 080 
 7 kinds of color system (NTSC / NTSC 4.43 / PAL / PAL-M / PAL-N / PAL60 / SECAM) 
 Projection Screen Size 60 inches to 110 inches (1524 mm -2794 mm) 
 Optical axis 10: -0.5 (fixed) 
 Projection Distance 0.60m ~ 1.14m 
 Screen aspect ratio 4:3 
 Projection is cast / equipment, Front / lifting, Rear / install, Rear / Ceiling (menu setting) 
 Speaker 4cm x 2cm (oval) 
 Maximum available sound output 1.0W (monaural) 
 Port 
 S-video input single-line, mini DIN 4-pin 
 Y: 1.0V [pp], C: 0.286V [pp], 75Ω 
 Single line of video input, RCA pin jack 
 1.0V [pp], 75Ω 
 Computer input / PC Input 2-wire, high-definition D-sub 15-pin (female) 
 ● RGB input 
 RGB: 0.7V [pp], 75Ω 
 The G-SYNC: 1.0V [pp], 75Ω 
 HD, VD / SYNC: TTL high impedance, compatible with automatic positive and negative 
 ● Y.PB.PR input 
 Y: 1.0V [pp] (including sync signal), 75Ω 
 PB.PR: 0.7V [pp], 75Ω 
 Audio input and two-lane, 0.5 V [rms], M3, end 
 Audio output singlet (LR: M3) 
 Monitor output 
 V [rms] ~ 2.0 V [rms] (variable) 
 Single-wire serial port D-sub 9-pin, in line with the RS-232C Specifications 
 Single-line LAN, 10BASE-T / 100BASE-T 
 The shell material resin moldings PC + ABS 
 Appearance (W × H × D) 327 × 124 × 307mm (not including protruding parts) 
 Weight of approximately 3.1kg * 4 (excluding the lens cap) 
 Environmental conditions Temperature: 0 ° C to 40 ° C * 5, Humidity: 20% ~ 80% (no condensation) 
 Random Annex power cord of the remote control lens cap (projector default incidental) Power cord safety lock cover to prevent falling lifting accessories RGB signal cable (1.8 m) 
 For remote control of AAA / R03 models battery (x 2) external dust filter CD-ROM